While water heater repair can seem difficult,it is actually quite simple. The following information will explain the process of repairing your heating unit to ensure that it will always function correctly. If you do not follow the instructions given here,it is possible that you will damage your unit beyond repair. Before beginning,it is important to inspect your system. This is necessary because some small parts are in and around the unit that cannot be seen with the naked eye. Any problems you might find should be reported to the manufacturer.
Remove the heater from the wall. Take note of where the wires are located and if any have been damaged,replace them. Next,turn off the power. Any leaky faucets or pipes should be checked first before attempting the heater. Then remove the valve or heat exchanger that holds the water in the water heater. After all parts have been removed,check the heating coil for leaks or cracks.
Check all connections before continuing. The small tube will usually have a black plug on the end. Connect a wire to the black plug and then to the other end of the coil. Place the heating coil back into the water heater and reconnect the thermostat. Reinstall the heating coil and return the heating element to the heater. Now that the thermostat is working,replace the thermostat into the unit and turn it back on.24 hour plumber